Industrial roller shutters in Paisley

In short

Industrial roller shutters for warehouses, yards, workshops and stores in Paisley. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Paisley
Postcode district: PA1
Area: Renfrewshire and Dunbartonshire
Survey: Free for new installations

Options that matter on site

Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.

Examples of work we can quote for

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Safety law for industrial doors in Scotland

Industrial doors in Paisley are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Sites in and around Paisley vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for industrial roller shutters in Paisley

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Paisley: your questions

Does an electric roller shutter at our Paisley site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Paisley?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Paisley, we confirm a fixed price for your opening in writing.

Can you convert our manual shutter in Paisley to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Paisley

Our teams cover Paisley (PA1) and nearby Renfrew, Johnstone, Clydebank, along with the rest of Renfrewshire and Dunbartonshire.

Other services in Paisley

More about Industrial roller shutters · industrial doors in Paisley. Last updated 19 October 2026.