Industrial roller shutters in Maryhill

At a glance

Roller shutters are a practical choice for sites in Maryhill (G20): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Maryhill
Postcode district: G20
Area: Glasgow
Survey: Free for new installations

What to specify

Manual override. If the power fails, the shutter can still be wound open by hand.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Colour finishes. Leave it galvanised or choose a colour that matches the building.

Examples of work we can quote for

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Who is responsible for door safety at a site in Maryhill?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Maryhill

Can you supply security-rated shutters in Maryhill?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

How much is an industrial roller shutter in Maryhill?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Maryhill, we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Maryhill site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Maryhill

Working in Maryhill? We also take on jobs in Glasgow, Govan, Bearsden and across Glasgow.

Other services in Maryhill

More about Industrial roller shutters · industrial doors in Maryhill. Last updated 19 October 2026.