Industrial door motor replacement in Fleetwood

In short

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Fleetwood. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Fleetwood
Postcode district: FY7
Area: Lancashire
Guide price: £845 – £2,395

What our engineers check and fix

Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Written records. You receive written details of the new drive and test results for your records.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.

What this work can involve

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Who is responsible for door safety at a site in Fleetwood?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Fleetwood

How much does an industrial door motor replacement cost in Fleetwood?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Fleetwood costs £145 to £195 ex VAT.

Do you replace motors on any make of door across Lancashire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Lancashire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Will our door in Fleetwood be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Fleetwood

Besides Fleetwood, we can survey and quote for sites in Thornton-Cleveleys, Blackpool, Morecambe and the rest of Lancashire.

Other services in Fleetwood

More about Industrial door motor replacement · industrial doors in Fleetwood. Last updated 19 October 2026.