Industrial door motor replacement in West Yorkshire

Quick answer

Motor replacement in West Yorkshire starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Area: West Yorkshire
Nation: England
Main town: Leeds
Guide price: £845 – £2,395

How we look after doors in West Yorkshire

Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Written records. A record of the work and tests for your maintenance file.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.

Examples of work we can quote for

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Safety law for industrial doors in England

Industrial doors in West Yorkshire are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Service and repair visits in West Yorkshire are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in West Yorkshire: your questions

Will our door in West Yorkshire be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Should we replace the whole door instead of the motor in West Yorkshire?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Is the motor really the problem with our door in West Yorkshire?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Towns in West Yorkshire we cover

We cover 18 towns in West Yorkshire for industrial door motor replacement, including Leeds, Bradford, Huddersfield, Wakefield.

Other services in West Yorkshire

More about Industrial door motor replacement. Last updated 19 October 2026.