Industrial door motor replacement in Cleckheaton

Quick answer

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Cleckheaton. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Cleckheaton
Postcode district: BD19
Area: West Yorkshire
Guide price: £845 – £2,395

What's included

Panel upgrades. New control panels with monitored safety inputs and inverter options.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Brake and override. Brakes tested and manual override checked on every change.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.

Jobs we can carry out

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Who is responsible for door safety at a site in Cleckheaton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Budgeting for industrial door motor replacement in Cleckheaton

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Cleckheaton

Do you replace motors on any make of door across West Yorkshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across West Yorkshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Will our door in Cleckheaton be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How much does an industrial door motor replacement cost in Cleckheaton?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Cleckheaton costs £145 to £195 ex VAT.

Industrial door motor replacement near Cleckheaton

Cleckheaton is in the BD19 postcode district in West Yorkshire. We also cover Brighouse, Batley, Dewsbury.

Other services in Cleckheaton

More about Industrial door motor replacement · industrial doors in Cleckheaton. Last updated 19 October 2026.