Industrial door motor replacement in Dewsbury

The short version

We can replace failed and obsolete door motors in Dewsbury and across West Yorkshire, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Dewsbury
Postcode district: WF12
Area: West Yorkshire
Guide price: £845 – £2,395

How we look after doors in Dewsbury

Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.

Typical scopes of work

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Who is responsible for door safety at a site in Dewsbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Service and repair visits in Dewsbury are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Budgeting for industrial door motor replacement in Dewsbury

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Can you replace an obsolete door motor in Dewsbury?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

How soon can a door motor in Dewsbury be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Is the motor really the problem with our door in Dewsbury?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Dewsbury

Working in Dewsbury? We also take on jobs in Batley, Ossett, Morley and across West Yorkshire.

Other services in Dewsbury

More about Industrial door motor replacement · industrial doors in Dewsbury. Last updated 19 October 2026.