Hangar and large-span doors in West Yorkshire

Quick answer

If your sliding hangar doors in West Yorkshire have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.

Area: West Yorkshire
Nation: England
Main town: Leeds
Survey: Free for new installations

What we fit in West Yorkshire

Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.

Typical scopes of work

Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.

Who is responsible for door safety at a site in West Yorkshire?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in West Yorkshire

Which hangar door type would suit our building in West Yorkshire?

It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.

How much does a hangar door cost in West Yorkshire?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in West Yorkshire, we confirm a fixed price in writing.

Do you work on hangar door projects with our engineer in West Yorkshire?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

Towns in West Yorkshire we cover

We cover 18 towns in West Yorkshire for hangar and large-span doors, including Leeds, Bradford, Huddersfield, Wakefield.

Other services in West Yorkshire

More about Hangar and large-span doors. Last updated 19 October 2026.