Industrial door motor replacement in Yeadon

At a glance

We can replace failed and obsolete door motors in Yeadon and across West Yorkshire, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Yeadon
Postcode district: LS19
Area: West Yorkshire
Guide price: £845 – £2,395

How we look after doors in Yeadon

Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Panel upgrades. New control panels with monitored safety inputs and inverter options.

What this work can involve

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Powered door rules that apply in Yeadon

Yeadon is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Service and repair visits in Yeadon are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Prices for industrial door motor replacement in Yeadon

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

How much does an industrial door motor replacement cost in Yeadon?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Yeadon costs £145 to £195 ex VAT.

How soon can a door motor in Yeadon be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Is the motor really the problem with our door in Yeadon?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Yeadon

Besides Yeadon, we can survey and quote for sites in Guiseley, Shipley, Pudsey and the rest of West Yorkshire.

Other services in Yeadon

More about Industrial door motor replacement · industrial doors in Yeadon. Last updated 19 October 2026.