Industrial door motor replacement in Skelmersdale

At a glance

Replacing a door motor at a site in Skelmersdale is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Skelmersdale
Postcode district: WN8
Area: Lancashire
Guide price: £845 – £2,395

What our engineers check and fix

Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Brake and override. Brakes tested and manual override checked on every change.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Jobs we can carry out

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Who is responsible for door safety at a site in Skelmersdale?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Is the motor really the problem with our door in Skelmersdale?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Should we replace the whole door instead of the motor in Skelmersdale?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Skelmersdale?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Skelmersdale costs £145 to £195 ex VAT.

Industrial door motor replacement near Skelmersdale

Besides Skelmersdale, we can survey and quote for sites in Ormskirk, Wigan, Kirkby and the rest of Lancashire.

Other services in Skelmersdale

More about Industrial door motor replacement · industrial doors in Skelmersdale. Last updated 19 October 2026.