Industrial door motor replacement in Formby

The short version

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Formby. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Formby
Postcode district: L37
Area: Merseyside
Guide price: £845 – £2,395

How we look after doors in Formby

Written records. You receive written details of the new drive and test results for your records.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Brake and override. Brakes tested and manual override checked on every change.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Typical scopes of work

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Safety law for industrial doors in England

Industrial doors in Formby are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Formby

Should we replace the whole door instead of the motor in Formby?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Do you replace motors on any make of door across Merseyside?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Merseyside, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

How much does an industrial door motor replacement cost in Formby?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Formby costs £145 to £195 ex VAT.

Industrial door motor replacement near Formby

Working in Formby? We also take on jobs in Maghull, Southport, Bootle and across Merseyside.

Other services in Formby

More about Industrial door motor replacement · industrial doors in Formby. Last updated 19 October 2026.