Industrial door motor replacement in Banbury

In short

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Banbury. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Banbury
Postcode district: OX16
Area: Oxfordshire
Guide price: £845 – £2,395

How we look after doors in Banbury

Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Written records. You receive written details of the new drive and test results for your records.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.

Safety law for industrial doors in England

Industrial doors in Banbury are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Service and repair visits in Banbury are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Prices for industrial door motor replacement in Banbury

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

How much does an industrial door motor replacement cost in Banbury?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Banbury costs £145 to £195 ex VAT.

Can you replace an obsolete door motor in Banbury?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Do you replace motors on any make of door across Oxfordshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Oxfordshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Industrial door motor replacement near Banbury

Banbury is in the OX16 postcode district in Oxfordshire. We also cover Bicester, Daventry, Leamington Spa.

Other services in Banbury

More about Industrial door motor replacement · industrial doors in Banbury. Last updated 19 October 2026.