Industrial door motor replacement in Kinross

The short version

Replacing a door motor at a site in Kinross is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Kinross
Postcode district: KY13
Area: Perth and Kinross
Guide price: £845 – £2,395

What our engineers check and fix

Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Typical scopes of work

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Powered door rules that apply in Kinross

Kinross is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Should we replace the whole door instead of the motor in Kinross?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Do you replace motors on any make of door across Perth and Kinross?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Perth and Kinross, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

How much does an industrial door motor replacement cost in Kinross?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Kinross costs £145 to £195 ex VAT.

Industrial door motor replacement near Kinross

Kinross is in the KY13 postcode district in Perth and Kinross. We also cover Dunfermline, Glenrothes, Rosyth.

Other services in Kinross

More about Industrial door motor replacement · industrial doors in Kinross. Last updated 19 October 2026.