In short
Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Fife. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.
- Area
- Fife
- Nation
- Scotland
- Main town
- Dunfermline
- Guide price
- £845 – £2,395
What's included
- Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
- Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
- Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
- Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
- Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
What this work can involve
- Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
- Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
- Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Powered door rules that apply in Fife
Fife is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.
Prices for industrial door motor replacement in Fife
| Item | Guide price (ex VAT) |
|---|---|
| Motor replacement | £845 – £2,395 |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.
Your questions about industrial door motor replacement
Is the motor really the problem with our door in Fife?
Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.
Should we replace the whole door instead of the motor in Fife?
If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.
How much does an industrial door motor replacement cost in Fife?
Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Fife costs £145 to £195 ex VAT.
Towns in Fife we cover
We cover 5 towns in Fife for industrial door motor replacement, including Dunfermline, Kirkcaldy, Glenrothes, St Andrews.
Other services in Fife
- Steel personnel and fire exit doors
- Sliding and folding industrial doors
- Industrial door repairs
- Sectional overhead doors
- Complete loading bays
- High-speed doors
- Door safety upgrades
- Hangar and large-span doors
More about Industrial door motor replacement. Last updated 19 October 2026.