Industrial door motor replacement in Egham

The short version

Door stalling, grinding or creeping down at your Egham site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Egham
Postcode district: TW20
Area: Surrey
Guide price: £845 – £2,395

What's included

Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Brake and override. Brakes tested and manual override checked on every change.
Written records. You receive written details of the new drive and test results for your records.

What this work can involve

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Powered door rules that apply in Egham

Egham is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Is the motor really the problem with our door in Egham?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How much does an industrial door motor replacement cost in Egham?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Egham costs £145 to £195 ex VAT.

Will our door in Egham be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Egham

Egham is in the TW20 postcode district in Surrey. We also cover Staines-upon-Thames, Ashford (Surrey), Windsor.

Other services in Egham

More about Industrial door motor replacement · industrial doors in Egham. Last updated 19 October 2026.