The short version
Each steel door project in Egham starts with a free survey of the opening, escape route and security needs, followed by a written fixed price before any work starts on site.
- Town
- Egham
- Postcode district
- TW20
- Area
- Surrey
- Survey
- Free for new installations
Options that matter on site
- Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
- Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
- Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
- Louvres and vision. Ventilation louvres for plant and switch rooms, and glazed panels where people need to see through.
- Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Typical scopes of work
- Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
- Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
- Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
Door rules for workplaces in England
Doors in Egham workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Egham
Do you repair fire exit doors across Surrey?
Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Surrey. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.
Can a steel door at our Egham unit be security rated?
Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.
Can our Egham fire exit be locked from outside?
Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.
Steel personnel and fire exit doors near Egham
Working in Egham? We also take on jobs in Staines-upon-Thames, Ashford (Surrey), Windsor and across Surrey.
- Steel personnel and fire exit doors in Staines-upon-Thames
- Steel personnel and fire exit doors in Ashford (Surrey)
- Steel personnel and fire exit doors in Windsor
- Steel personnel and fire exit doors in Slough
- Steel personnel and fire exit doors in Feltham
- Steel personnel and fire exit doors in Sunbury-on-Thames
Other services in Egham
- Planned maintenance contracts
- Industrial door motor replacement
- Fire shutters
- Hangar and large-span doors
- Fire shutter servicing and drop tests
- Insulated roller shutter doors
- Industrial roller shutters
- PVC strip curtains
More about Steel personnel and fire exit doors · industrial doors in Egham. Last updated 19 October 2026.
