Steel personnel and fire exit doors in Windsor

In short

Each steel door project in Windsor starts with a free survey of the opening, escape route and security needs, followed by a written fixed price before any work starts on site.

Town: Windsor
Postcode district: SL4
Area: Berkshire
Survey: Free for new installations

What to specify

Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Outside access. Key or code access from outside while the exit stays free from inside.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.

What this work can involve

Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Door rules for workplaces in England

Doors in Windsor workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

How the work is organised

Sites in and around Windsor vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Windsor

Do you repair fire exit doors across Berkshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Berkshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Can a steel door at our Windsor unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

Which fire exit hardware do we need at our Windsor site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Steel personnel and fire exit doors near Windsor

Besides Windsor, we can survey and quote for sites in Slough, Egham, Staines-upon-Thames and the rest of Berkshire.

Other services in Windsor

More about Steel personnel and fire exit doors · industrial doors in Windsor. Last updated 19 October 2026.