Industrial door motor replacement in Tipton

In short

When the original motor on a door in Tipton (DY4) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Tipton
Postcode district: DY4
Area: West Midlands
Guide price: £845 – £2,395

What's included

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Written records. A record of the work and tests for your maintenance file.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.

Typical scopes of work

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Powered door rules that apply in Tipton

Tipton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Will our door in Tipton be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Is the motor really the problem with our door in Tipton?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Do you replace motors on any make of door across the West Midlands?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across the West Midlands, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Industrial door motor replacement near Tipton

Working in Tipton? We also take on jobs in Dudley, Wednesbury, West Bromwich and across the West Midlands.

Other services in Tipton

More about Industrial door motor replacement · industrial doors in Tipton. Last updated 19 October 2026.