Industrial door replacement in Dundee

Quick answer

Is an old door at your Dundee site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.

Town: Dundee
Postcode district: DD1
Area: Angus and Dundee
Survey: Free for new installations

What to specify

Free survey. We inspect the old door and measure the opening at no cost before quoting.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Disposal. Old doors taken away for recycling or disposal.

Jobs we can carry out

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.

Powered door rules that apply in Dundee

Dundee is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

How long will our opening in Dundee be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

How much does industrial door replacement cost in Dundee?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Dundee.

Can we change door type when replacing at our Dundee unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Dundee

Working in Dundee? We also take on jobs in St Andrews, Forfar, Arbroath and across Angus and Dundee.

Other services in Dundee

More about Industrial door replacement · industrial doors in Dundee. Last updated 19 October 2026.