Quick answer
Each door replacement in Bletchley starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.
- Town
- Bletchley
- Postcode district
- MK3
- Area
- Buckinghamshire
- Survey
- Free for new installations
Options for industrial door replacement in Bletchley
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Right door type. Replace with the same type or move to a door that suits your current needs.
- Ongoing servicing. New door added to a maintenance schedule from year one.
- Free survey. We inspect the old door and measure the opening at no cost before quoting.
- Safe strip-out. Springs unwound and the old door dismantled safely.
Jobs we can carry out
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
- Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Who is responsible for door safety at a site in Bletchley?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about industrial door replacement
Is the survey free for door replacement in Bletchley?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
Do you replace doors at multiple sites across Buckinghamshire?
Yes. We replace doors across Buckinghamshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
How long will our opening in Bletchley be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Industrial door replacement near Bletchley
Besides Bletchley, we can survey and quote for sites in Milton Keynes, Leighton Buzzard, Ampthill and the rest of Buckinghamshire.
- Industrial door replacement in Milton Keynes
- Industrial door replacement in Leighton Buzzard
- Industrial door replacement in Ampthill
- Industrial door replacement in Dunstable
- Industrial door replacement in Aylesbury
- Industrial door replacement in Bedford
Other services in Bletchley
- Industrial door repairs
- Sliding and folding industrial doors
- Fire shutters
- Impact traffic doors
- Dock leveller and loading bay repairs
- Industrial door motor replacement
- Sectional overhead doors
- Bollards and door protection
More about Industrial door replacement · industrial doors in Bletchley. Last updated 19 October 2026.