In short
Replacing a door at a unit in Tiverton (EX16) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.
- Town
- Tiverton
- Postcode district
- EX16
- Area
- Devon
- Survey
- Free for new installations
Options that matter on site
- Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
- Disposal. Old doors taken away for recycling or disposal.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Free survey. Existing door, opening and space assessed free of charge.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
Typical scopes of work
- Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Who is responsible for door safety at a site in Tiverton?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Industrial door replacement in Tiverton: your questions
Do you replace doors at multiple sites across Devon?
Yes. We replace doors across Devon, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
How long will our opening in Tiverton be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
How much does industrial door replacement cost in Tiverton?
Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Tiverton.
Industrial door replacement near Tiverton
Our teams cover Tiverton (EX16) and nearby Exeter, Taunton, Exmouth, along with the rest of Devon.
- Industrial door replacement in Exeter
- Industrial door replacement in Taunton
- Industrial door replacement in Exmouth
- Industrial door replacement in Newton Abbot
- Industrial door replacement in Bridgwater
- Industrial door replacement in Barnstaple
Other services in Tiverton
- Dock leveller and loading bay repairs
- Sectional overhead doors
- Fire shutter servicing and drop tests
- Industrial door motor replacement
- Hangar and large-span doors
- Steel personnel and fire exit doors
- Complete loading bays
- Industrial door repairs
More about Industrial door replacement · industrial doors in Tiverton. Last updated 19 October 2026.