Industrial door replacement in Welling

The short version

Industrial door replacement in Welling: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Town: Welling
Postcode district: DA16
Area: Greater London
Survey: Free for new installations

Options for industrial door replacement in Welling

Disposal. Old doors taken away for recycling or disposal.
Opening repairs. Any damage to the opening is put right so the new door fixes securely.
Free survey. Existing door, opening and space assessed free of charge.
Right door type. Replace with the same type or move to a door that suits your current needs.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.

Examples of work we can quote for

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.

Who is responsible for door safety at a site in Welling?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Budgeting for industrial door replacement in Welling

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Should we repair or replace our door in Welling?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How long will our opening in Welling be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

How much does industrial door replacement cost in Welling?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Welling.

Industrial door replacement near Welling

Welling is in the DA16 postcode district in Greater London. We also cover Bexleyheath, Bexley, Sidcup.

Other services in Welling

More about Industrial door replacement · industrial doors in Welling. Last updated 19 October 2026.