Industrial door replacement in Wimbledon

Quick answer

Industrial door replacement in Wimbledon: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Town: Wimbledon
Postcode district: SW19
Area: Greater London
Survey: Free for new installations

What we fit in Wimbledon

Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Commissioning. Each new door is tested and handed over with the documents it needs.
Right door type. Replace with the same type or move to a door that suits your current needs.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.

What this work can involve

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Phasing the replacement of several loading doors so only one bay is out of use at a time.

Safety law for industrial doors in England

Industrial doors in Wimbledon are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Wimbledon: your questions

Do you take the old door away from our Wimbledon site?

Yes. Strip-out includes removing the old door, springs, guides and drive from site for recycling or disposal. It is priced as a separate line in the quote so you can see exactly what removal costs.

Should we repair or replace our door in Wimbledon?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Can we change door type when replacing at our Wimbledon unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Wimbledon

Wimbledon is in the SW19 postcode district in Greater London. We also cover Morden, Mitcham, Putney.

Other services in Wimbledon

More about Industrial door replacement · industrial doors in Wimbledon. Last updated 19 October 2026.