The short version
Industrial door replacement in Lanarkshire: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.
- Area
- Lanarkshire
- Nation
- Scotland
- Main town
- Hamilton
- Survey
- Free for new installations
What to specify
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Right door type. Replace with the same type or move to a door that suits your current needs.
Examples of work we can quote for
- Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
- Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Powered door rules that apply in Lanarkshire
Lanarkshire is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Keeping your site running during the work
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Budgeting for industrial door replacement in Lanarkshire
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about industrial door replacement
How long will our opening in Lanarkshire be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Do you replace doors at multiple sites across Scotland?
Yes. We replace doors across Scotland, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
Do you take the old door away from our Lanarkshire site?
Yes. Strip-out includes removing the old door, springs, guides and drive from site for recycling or disposal. It is priced as a separate line in the quote so you can see exactly what removal costs.
Towns in Lanarkshire we cover
We cover 10 towns in Lanarkshire for industrial door replacement, including Hamilton, East Kilbride, Cumbernauld, Coatbridge.
Other services in Lanarkshire
- Door safety upgrades
- Cold store and freezer doors
- Bollards and door protection
- Dock levellers
- Sectional overhead doors
- Planned maintenance contracts
- Impact traffic doors
- Industrial roller shutters
More about Industrial door replacement. Last updated 19 October 2026.