At a glance
Each door replacement in Norfolk starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.
- Area
- Norfolk
- Nation
- England
- Main town
- Norwich
- Survey
- Free for new installations
Options for industrial door replacement in Norfolk
- Disposal. We take the old door away so there is nothing left on site to deal with.
- Free survey. Existing door, opening and space assessed free of charge.
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
- Safe strip-out. Springs unwound and the old door dismantled safely.
Jobs we can carry out
- Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
- Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
Who is responsible for door safety at a site in Norfolk?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Sites in and around Norfolk vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices for industrial door replacement
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Industrial door replacement in Norfolk: your questions
Can we change door type when replacing at our Norfolk unit?
Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.
Should we repair or replace our door in Norfolk?
If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.
How much does industrial door replacement cost in Norfolk?
Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Norfolk.
Towns in Norfolk we cover
We cover 4 towns in Norfolk for industrial door replacement, including Norwich, Great Yarmouth, King's Lynn, Thetford.
Other services in Norfolk
- Sliding and folding industrial doors
- Industrial door motor replacement
- Dock shelters and seals
- Industrial roller shutters
- Sectional overhead doors
- PVC strip curtains
- Cold store and freezer doors
- Hangar and large-span doors
More about Industrial door replacement. Last updated 19 October 2026.