The short version
We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Warwick and across Warwickshire, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.
- Town
- Warwick
- Postcode district
- CV34
- Area
- Warwickshire
- Survey
- Free for new installations
What we fit in Warwick
- Opening repairs. Any damage to the opening is put right so the new door fixes securely.
- Right door type. Replace with the same type or move to a door that suits your current needs.
- Safe strip-out. Springs unwound and the old door dismantled safely.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
- Ongoing servicing. New door added to a maintenance schedule from year one.
Typical scopes of work
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Who is responsible for door safety at a site in Warwick?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does industrial door replacement cost in Warwick?
Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Warwick.
How long will our opening in Warwick be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Is the survey free for door replacement in Warwick?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
Industrial door replacement near Warwick
Our teams cover Warwick (CV34) and nearby Leamington Spa, Kenilworth, Stratford-upon-Avon, along with the rest of Warwickshire.
- Industrial door replacement in Leamington Spa
- Industrial door replacement in Kenilworth
- Industrial door replacement in Stratford-upon-Avon
- Industrial door replacement in Coventry
- Industrial door replacement in Solihull
- Industrial door replacement in Shirley
Other services in Warwick
- High-speed doors
- Door automation and controls
- Industrial roller shutters
- Hangar and large-span doors
- Steel personnel and fire exit doors
- Door safety upgrades
- PVC strip curtains
- Dock shelters and seals
More about Industrial door replacement · industrial doors in Warwick. Last updated 19 October 2026.