In short
When a fire engineer specifies a shutter for a site in Lurgan, we supply a certified product that matches the rating, install it to the manufacturer's details and can maintain it afterwards.
- Town
- Lurgan
- Postcode district
- BT66
- Area
- Armagh
- Survey
- Free for new installations
What to specify
- Alarm interface. Release linked to the fire alarm and designed to BS 7273-4.
- Tested products. Shutters supplied with the manufacturer's fire test evidence and Declaration of Performance.
- Battery back-up. Back-up units maintain controlled closing during a mains failure.
- Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
- Daily-use models. Motorised fire shutters that also work as everyday doors.
Examples of work we can quote for
- Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
- Supplying a fire shutter to a fire engineer's specification on a new-build unit, timed to the main contractor's programme.
- Coordinating commissioning with the fire alarm contractor so the shutter release is proven during the same visit.
Fire safety duties for shutters in Northern Ireland
In Northern Ireland the person with fire safety duties (often called the appropriate person) has the duty under the Fire and Rescue Services (Northern Ireland) Order 2006 and the Fire Safety Regulations (Northern Ireland) 2010 to keep fire safety measures, including fire shutters, maintained and in efficient working order. Keeping test records is expected good practice. Enforcement in Lurgan is by the Northern Ireland Fire and Rescue Service.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about fire shutters
Can a fire shutter in Lurgan be fitted to any wall?
No. It must be fitted to a wall of the type covered by the manufacturer's test evidence, with fire-stopping as detailed. If your wall differs, we explain what building work is needed before the shutter is ordered.
How much does a fire shutter cost in Lurgan?
Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Lurgan.
Can you link a fire shutter to our existing alarm in Lurgan?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Fire shutters near Lurgan
Our teams cover Lurgan (BT66) and nearby Craigavon, Portadown, Banbridge, along with the rest of County Armagh.
- Fire shutters in Craigavon
- Fire shutters in Portadown
- Fire shutters in Banbridge
- Fire shutters in Lisburn
- Fire shutters in Armagh
- Fire shutters in Dungannon
Other services in Lurgan
- Industrial roller shutters
- Industrial door installation
- Door safety upgrades
- Hangar and large-span doors
- Insulated roller shutter doors
- Industrial door motor replacement
- Industrial door repairs
- Dock leveller and loading bay repairs
More about Fire shutters · industrial doors in Lurgan. Last updated 19 October 2026.