Fire shutters in Stanley

Quick answer

Fire shutters in Stanley (DH9) supplied and fitted with their control panel, warning devices and alarm release, then drop-tested and handed over with commissioning records for your fire safety file.

Town: Stanley
Postcode district: DH9
Area: County Durham
Survey: Free for new installations

Options for fire shutters in Stanley

Daily-use models. Where needed, the shutter can be motorised for daily traffic and still close on alarm.
Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
Certified install. We follow the certified installation details exactly, because the rating depends on them.
Alarm interface. Release linked to the fire alarm and designed to BS 7273-4.
Battery back-up. Batteries keep the closing sequence under control even if mains power is lost.

Jobs we can carry out

Building up a blockwork wall to the tested construction before fitting a new compartment fire shutter.
Fitting a 120-minute fire shutter to a conveyor opening between production and storage compartments, released by the fire alarm.
Supplying a fire shutter to a fire engineer's specification on a new-build unit, timed to the main contractor's programme.

Fire safety duties for shutters in Stanley

In England, fire shutters are part of the fire precautions the responsible person must keep maintained under the Regulatory Reform (Fire Safety) Order 2005: in efficient working order and in good repair. Testing at suitable intervals and keeping the results is expected good practice and supports your fire risk assessment. Enforcement in Stanley is by the local fire and rescue authority.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Budgeting for fire shutters in Stanley

Fire shutters guide prices
Item	Guide price (ex VAT)
Fire shutter, single, with control panel and fail-safe closing	£4,495 – £11,995
Fire shutter service with drop test, per shutter	£125 – £265

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Fire shutters in Stanley: your questions

Can you link a fire shutter to our existing alarm in Stanley?

Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.

How long does fire shutter installation take at a Stanley site?

A single shutter is typically fitted in one to two days, with commissioning and alarm testing on top. Lead times for fire-rated products are confirmed with the quote, and work is planned around your operations.

How much does a fire shutter cost in Stanley?

Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Stanley.

Fire shutters near Stanley

Working in Stanley? We also take on jobs in Chester-le-Street, Consett, Gateshead and across County Durham.

Other services in Stanley

More about Fire shutters · industrial doors in Stanley. Last updated 19 October 2026.