In short
Replacing an ageing fire shutter in Cumbria? We check the wall still suits the new shutter's tested specification, fit it with fire-stopping as detailed and prove it closes on alarm before we leave.
- Area
- Cumbria
- Nation
- England
- Main town
- Carlisle
- Survey
- Free for new installations
What to specify
- Warning devices. Sounders and beacons to warn people before and during descent.
- Alarm interface. Release linked to the fire alarm and designed to BS 7273-4.
- Certified install. We follow the certified installation details exactly, because the rating depends on them.
- Tested products. Every shutter comes with its maker's furnace test or assessment evidence and performance declaration.
- Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
Typical scopes of work
- Building up a blockwork wall to the tested construction before fitting a new compartment fire shutter.
- Installing a motorised fire shutter that also serves as the daily goods door between two warehouse compartments.
- Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
Fire shutter law in England
A fire shutter only does its job if it closes when needed. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must keep fire safety equipment maintained in efficient working order, and keeping test records is the usual way to show it. Shutters must also stay as the manufacturer tested and certified them, so repairs should use the right parts. In Cumbria, the enforcing authority is the local fire and rescue authority.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for fire shutters in Cumbria
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Cumbria
How much does a fire shutter cost in Cumbria?
Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Cumbria.
Can a fire shutter in Cumbria be fitted to any wall?
No. It must be fitted to a wall of the type covered by the manufacturer's test evidence, with fire-stopping as detailed. If your wall differs, we explain what building work is needed before the shutter is ordered.
Who maintains a fire shutter at our Cumbria premises?
The person in control of the premises: the responsible person in England and Wales, the dutyholder in Scotland, or in Northern Ireland the person with fire safety duties. Check your lease to see whether landlord or tenant arranges servicing.
Towns in Cumbria we cover
We cover 5 towns in Cumbria for fire shutters, including Carlisle, Barrow-in-Furness, Kendal, Whitehaven.
Other services in Cumbria
- Door safety upgrades
- Bollards and door protection
- Dock shelters and seals
- Sliding and folding industrial doors
- Industrial door installation
- Dock levellers
- Sectional overhead doors
- Industrial door replacement
More about Fire shutters. Last updated 19 October 2026.