The short version
We can install fire shutters in Dunfermline and across Fife on conveyor openings, serveries and compartment walls, with fail-safe closing, battery back-up and the paperwork your fire risk assessor will want to see.
- Town
- Dunfermline
- Postcode district
- KY12
- Area
- Fife
- Survey
- Free for new installations
What we fit in Dunfermline
- Records. You receive records of the installation, commissioning and first drop test for your files.
- Fail-safe closing. Controlled descent on alarm or power loss, with governor speed control.
- Tested products. Every shutter comes with its maker's furnace test or assessment evidence and performance declaration.
- Certified install. Fitted strictly to the manufacturer's specification for fixings, wall type and fire-stopping.
- Alarm interface. Release linked to the fire alarm and designed to BS 7273-4.
Typical scopes of work
- Installing a motorised fire shutter that also serves as the daily goods door between two warehouse compartments.
- Supplying a fire shutter to a fire engineer's specification on a new-build unit, timed to the main contractor's programme.
- Coordinating commissioning with the fire alarm contractor so the shutter release is proven during the same visit.
Who must keep fire shutters working at a site in Dunfermline?
The dutyholder, usually the employer, owner or managing agent, has the duty under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. Your fire risk assessment should list each shutter, how it is released and how often it is tested, and the Scottish Fire and Rescue Service may ask how the shutters are maintained.
Access, phasing and timing
For busy sites in Fife the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Dunfermline
Can you link a fire shutter to our existing alarm in Dunfermline?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Can a fire shutter in Dunfermline be fitted to any wall?
No. It must be fitted to a wall of the type covered by the manufacturer's test evidence, with fire-stopping as detailed. If your wall differs, we explain what building work is needed before the shutter is ordered.
How much does a fire shutter cost in Dunfermline?
Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Dunfermline.
Fire shutters near Dunfermline
Working in Dunfermline? We also take on jobs in Rosyth, Bo'ness, Kinross and across Fife.
- Fire shutters in Rosyth
- Fire shutters in Bo'ness
- Fire shutters in Kinross
- Fire shutters in Grangemouth
- Fire shutters in Livingston
- Fire shutters in Kirkcaldy
Other services in Dunfermline
- Dock levellers
- Dock leveller and loading bay repairs
- Planned maintenance contracts
- Industrial door repairs
- Door automation and controls
- Dock shelters and seals
- PVC strip curtains
- Sectional overhead doors
More about Fire shutters · industrial doors in Dunfermline. Last updated 19 October 2026.
