Fire shutters in Worksop

In short

We can install fire shutters in Worksop and across Nottinghamshire on conveyor openings, serveries and compartment walls, with fail-safe closing, battery back-up and the paperwork your fire risk assessor will want to see.

Town: Worksop
Postcode district: S80
Area: Nottinghamshire
Survey: Free for new installations

Options that matter on site

Certified install. Fitted strictly to the manufacturer's specification for fixings, wall type and fire-stopping.
Daily-use models. Motorised fire shutters that also work as everyday doors.
Alarm interface. Release linked to the fire alarm and designed to BS 7273-4.
Tested products. Shutters supplied with the manufacturer's fire test evidence and Declaration of Performance.
Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.

Jobs we can carry out

Building up a blockwork wall to the tested construction before fitting a new compartment fire shutter.
Fitting a 120-minute fire shutter to a conveyor opening between production and storage compartments, released by the fire alarm.
Supplying a fire shutter to a fire engineer's specification on a new-build unit, timed to the main contractor's programme.

Fire safety duties for shutters in Worksop

In England, fire shutters are part of the fire precautions the responsible person must keep maintained under the Regulatory Reform (Fire Safety) Order 2005: in efficient working order and in good repair. Testing at suitable intervals and keeping the results is expected good practice and supports your fire risk assessment. Enforcement in Worksop is by the local fire and rescue authority.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for fire shutters in Worksop

Fire shutters guide prices
Item	Guide price (ex VAT)
Fire shutter, single, with control panel and fail-safe closing	£4,495 – £11,995
Fire shutter service with drop test, per shutter	£125 – £265

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Fire shutters in Worksop: your questions

Can you link a fire shutter to our existing alarm in Worksop?

Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.

How much does a fire shutter cost in Worksop?

Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Worksop.

Do you service fire shutters across Nottinghamshire?

Yes. We service and drop-test fire shutters across Nottinghamshire, including most makes we did not install, and provide a written report for each shutter. Servicing visits are chargeable at a fixed price per shutter.

Fire shutters near Worksop

Our teams cover Worksop (S80) and nearby Retford, Staveley, Mansfield, along with the rest of Nottinghamshire.

Other services in Worksop

More about Fire shutters · industrial doors in Worksop. Last updated 19 October 2026.