Steel personnel and fire exit doors in Worksop

In short

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Worksop. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Worksop
Postcode district: S80
Area: Nottinghamshire
Survey: Free for new installations

Options that matter on site

Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Outside access. Key or code access from outside while the exit stays free from inside.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Louvres and vision. Ventilation louvres for plant and switch rooms, and glazed panels where people need to see through.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.

Typical scopes of work

Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.

Which workplace rules apply to these doors?

For premises in Worksop, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Worksop: your questions

Do you repair fire exit doors across Nottinghamshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Nottinghamshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Can you fit fire-rated steel doors in Worksop?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Which fire exit hardware do we need at our Worksop site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Steel personnel and fire exit doors near Worksop

Our teams cover Worksop (S80) and nearby Retford, Staveley, Mansfield, along with the rest of Nottinghamshire.

Other services in Worksop

More about Steel personnel and fire exit doors · industrial doors in Worksop. Last updated 19 October 2026.