Hangar and large-span doors in Kilwinning

Quick answer

If your sliding hangar doors in Kilwinning have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.

Town: Kilwinning
Postcode district: KA13
Area: Ayrshire
Survey: Free for new installations

What we fit in Kilwinning

Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.

Jobs we can carry out

Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.

Who is responsible for door safety at a site in Kilwinning?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for hangar and large-span doors in Kilwinning

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about hangar and large-span doors

Do you work on hangar door projects with our engineer in Kilwinning?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

Can a large door at our Kilwinning site be operated without power?

Most powered large doors include a manual or emergency means of operation for power failures. How it works depends on the door type and size, and we explain it at handover and in the user instructions.

How much does a hangar door cost in Kilwinning?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Kilwinning, we confirm a fixed price in writing.

Hangar and large-span doors near Kilwinning

Kilwinning is in the KA13 postcode district in Ayrshire. We also cover Irvine, Troon, Kilmarnock.

Other services in Kilwinning

More about Hangar and large-span doors · industrial doors in Kilwinning. Last updated 19 October 2026.