At a glance
We can supply, install and refurbish large-span doors across Buckinghamshire where standard industrial doors stop, from hangars and rail sheds to heavy plant workshops, with a free survey for sites in Amersham.
- Town
- Amersham
- Postcode district
- HP7
- Area
- Buckinghamshire
- Survey
- Free for new installations
What we fit in Amersham
- Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
Typical scopes of work
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
Who is responsible for door safety at a site in Amersham?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Hangar and large-span doors in Amersham: your questions
Can you refurbish our existing hangar doors in Amersham?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
How long would a large-span door installation take in Amersham?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
How much does a hangar door cost in Amersham?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Amersham, we confirm a fixed price in writing.
Hangar and large-span doors near Amersham
Amersham is in the HP7 postcode district in Buckinghamshire. We also cover Chesham, Gerrards Cross, High Wycombe.
- Hangar and large-span doors in Chesham
- Hangar and large-span doors in Gerrards Cross
- Hangar and large-span doors in High Wycombe
- Hangar and large-span doors in Rickmansworth
- Hangar and large-span doors in Berkhamsted
- Hangar and large-span doors in Hemel Hempstead
Other services in Amersham
- Industrial roller shutters
- High-speed doors
- PVC strip curtains
- Industrial door repairs
- Industrial door motor replacement
- Complete loading bays
- Dock leveller and loading bay repairs
- Sliding and folding industrial doors
More about Hangar and large-span doors · industrial doors in Amersham. Last updated 19 October 2026.