The short version
Planning a new hangar or large shed near Colchester? We work with your structural engineer and contractor on multi-leaf sliding, vertical-lift fabric or large sectional doors designed around the building.
- Town
- Colchester
- Postcode district
- CO1
- Area
- Essex
- Survey
- Free for new installations
What we fit in Colchester
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
Typical scopes of work
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
Safety law for industrial doors in England
Industrial doors in Colchester are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Keeping your site running during the work
Sites in and around Colchester vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Hangar and large-span doors in Colchester: your questions
Can a large door at our Colchester site be operated without power?
Most powered large doors include a manual or emergency means of operation for power failures. How it works depends on the door type and size, and we explain it at handover and in the user instructions.
Can you refurbish our existing hangar doors in Colchester?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
Which hangar door type would suit our building in Colchester?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
Hangar and large-span doors near Colchester
Colchester is in the CO1 postcode district in Essex. We also cover Sudbury, Clacton-on-Sea, Witham.
- Hangar and large-span doors in Sudbury
- Hangar and large-span doors in Clacton-on-Sea
- Hangar and large-span doors in Witham
- Hangar and large-span doors in Maldon
- Hangar and large-span doors in Braintree
- Hangar and large-span doors in Ipswich
Other services in Colchester
- Sectional overhead doors
- Planned maintenance contracts
- Steel personnel and fire exit doors
- Industrial door motor replacement
- Fire shutters
- Insulated roller shutter doors
- Bollards and door protection
- Industrial door replacement
More about Hangar and large-span doors · industrial doors in Colchester. Last updated 19 October 2026.