In short
We can supply, install and refurbish large-span doors across Essex where standard industrial doors stop, from hangars and rail sheds to heavy plant workshops, with a free survey for sites in Maldon.
- Town
- Maldon
- Postcode district
- CM9
- Area
- Essex
- Survey
- Free for new installations
Options that matter on site
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
Typical scopes of work
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
Who is responsible for door safety at a site in Maldon?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for hangar and large-span doors in Maldon
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Maldon
How much does a hangar door cost in Maldon?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Maldon, we confirm a fixed price in writing.
Can a large door at our Maldon site be operated without power?
Most powered large doors include a manual or emergency means of operation for power failures. How it works depends on the door type and size, and we explain it at handover and in the user instructions.
Do you work on hangar door projects with our engineer in Maldon?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
Hangar and large-span doors near Maldon
Working in Maldon? We also take on jobs in Witham, Chelmsford, Rayleigh and across Essex.
- Hangar and large-span doors in Witham
- Hangar and large-span doors in Chelmsford
- Hangar and large-span doors in Rayleigh
- Hangar and large-span doors in Wickford
- Hangar and large-span doors in Braintree
- Hangar and large-span doors in Billericay
Other services in Maldon
- Industrial door repairs
- Industrial roller shutters
- PVC strip curtains
- High-speed doors
- Door automation and controls
- Dock leveller and loading bay repairs
- Door safety upgrades
- Sliding and folding industrial doors
More about Hangar and large-span doors · industrial doors in Maldon. Last updated 19 October 2026.