At a glance
Large openings at sites in Beckenham (BR3) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.
- Town
- Beckenham
- Postcode district
- BR3
- Area
- Greater London
- Survey
- Free for new installations
Options that matter on site
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
- Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
What this work can involve
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
- Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Who is responsible for door safety at a site in Beckenham?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Sites in and around Beckenham vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Hangar and large-span doors in Beckenham: your questions
Do you work on hangar door projects with our engineer in Beckenham?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
How much does a hangar door cost in Beckenham?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Beckenham, we confirm a fixed price in writing.
Can you refurbish our existing hangar doors in Beckenham?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
Hangar and large-span doors near Beckenham
Beckenham is in the BR3 postcode district in Greater London. We also cover Bromley, Catford, Croydon.
- Hangar and large-span doors in Bromley
- Hangar and large-span doors in Catford
- Hangar and large-span doors in Croydon
- Hangar and large-span doors in Lewisham
- Hangar and large-span doors in Blackheath
- Hangar and large-span doors in South Croydon
Other services in Beckenham
- Steel personnel and fire exit doors
- Fire shutters
- High-speed doors
- Industrial door repairs
- Cold store and freezer doors
- Industrial door installation
- Dock levellers
- Planned maintenance contracts
More about Hangar and large-span doors · industrial doors in Beckenham. Last updated 19 October 2026.