The short version
If your sliding hangar doors in Edmonton have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.
- Town
- Edmonton
- Postcode district
- N9
- Area
- Greater London
- Survey
- Free for new installations
What to specify
- Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.
Jobs we can carry out
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Safety law for industrial doors in England
Industrial doors in Edmonton are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Edmonton
Do you work on hangar door projects with our engineer in Edmonton?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
How long would a large-span door installation take in Edmonton?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
Can a large door at our Edmonton site be operated without power?
Most powered large doors include a manual or emergency means of operation for power failures. How it works depends on the door type and size, and we explain it at handover and in the user instructions.
Hangar and large-span doors near Edmonton
Working in Edmonton? We also take on jobs in Tottenham, Enfield, Chingford and across Greater London.
- Hangar and large-span doors in Tottenham
- Hangar and large-span doors in Enfield
- Hangar and large-span doors in Chingford
- Hangar and large-span doors in Walthamstow
- Hangar and large-span doors in Wood Green
- Hangar and large-span doors in Woodford Green
Other services in Edmonton
- High-speed doors
- Sliding and folding industrial doors
- Cold store and freezer doors
- Industrial roller shutters
- Industrial door installation
- Steel personnel and fire exit doors
- Insulated roller shutter doors
- Complete loading bays
More about Hangar and large-span doors · industrial doors in Edmonton. Last updated 19 October 2026.