Steel personnel and fire exit doors in Edmonton

Quick answer

Replacing a worn timber or tired steel door at a site in Edmonton (N9)? Our galvanised steel doorsets resist knocks, weather and forced entry, and are finished in a powder-coated colour of your choice.

Town: Edmonton
Postcode district: N9
Area: Greater London
Survey: Free for new installations

Options that matter on site

Louvres and vision. Ventilation louvres for plant and switch rooms, and glazed panels where people need to see through.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.

Typical scopes of work

Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.

Which workplace rules apply to these doors?

For premises in Edmonton, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for steel personnel and fire exit doors in Edmonton

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How much is a steel personnel door in Edmonton?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Edmonton premises in writing after a free survey.

Do you repair fire exit doors across Greater London?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Greater London. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Which fire exit hardware do we need at our Edmonton site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Steel personnel and fire exit doors near Edmonton

Besides Edmonton, we can survey and quote for sites in Tottenham, Enfield, Chingford and the rest of Greater London.

Other services in Edmonton

More about Steel personnel and fire exit doors · industrial doors in Edmonton. Last updated 19 October 2026.