At a glance
Large openings at sites in Walkden (M28) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.
- Town
- Walkden
- Postcode district
- M28
- Area
- Greater Manchester
- Survey
- Free for new installations
What we fit in Walkden
- Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
- Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
- Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
- Drives and controls. Electric drives per leaf or central, with manual or emergency operation.
Examples of work we can quote for
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
- Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Who is responsible for door safety at a site in Walkden?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Walkden
Do you service large doors across Greater Manchester?
Yes. We service and repair hangar and large-span doors across Greater Manchester, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Which hangar door type would suit our building in Walkden?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
Do you work on hangar door projects with our engineer in Walkden?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
Hangar and large-span doors near Walkden
Besides Walkden, we can survey and quote for sites in Farnworth, Swinton, Tyldesley and the rest of Greater Manchester.
- Hangar and large-span doors in Farnworth
- Hangar and large-span doors in Swinton
- Hangar and large-span doors in Tyldesley
- Hangar and large-span doors in Eccles
- Hangar and large-span doors in Atherton
- Hangar and large-span doors in Radcliffe
Other services in Walkden
- Industrial door replacement
- Dock shelters and seals
- Fire shutter servicing and drop tests
- Industrial door installation
- Impact traffic doors
- Cold store and freezer doors
- Fire shutters
- Industrial door repairs
More about Hangar and large-span doors · industrial doors in Walkden. Last updated 19 October 2026.