The short version
Large openings at sites in Folkestone (CT19) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.
- Town
- Folkestone
- Postcode district
- CT19
- Area
- Kent
- Survey
- Free for new installations
What we fit in Folkestone
- Safety systems. Edge protection, photocells, warning lights, sounders and interlocks.
- Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
- Multi-leaf sliding. Classic hangar doors with leaves that slide on parallel tracks and stack clear of the opening.
Examples of work we can quote for
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
Powered door rules that apply in Folkestone
Folkestone is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
For busy sites in Kent the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Hangar and large-span doors in Folkestone: your questions
How long would a large-span door installation take in Folkestone?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
How much does a hangar door cost in Folkestone?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Folkestone, we confirm a fixed price in writing.
Which hangar door type would suit our building in Folkestone?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
Hangar and large-span doors near Folkestone
Folkestone is in the CT19 postcode district in Kent. We also cover Dover, Ashford (Kent), Deal.
- Hangar and large-span doors in Dover
- Hangar and large-span doors in Ashford (Kent)
- Hangar and large-span doors in Deal
- Hangar and large-span doors in Canterbury
- Hangar and large-span doors in Faversham
- Hangar and large-span doors in Herne Bay
Other services in Folkestone
- Door automation and controls
- Dock levellers
- Industrial door motor replacement
- Industrial door replacement
- Dock shelters and seals
- Fire shutter servicing and drop tests
- Sectional overhead doors
- Planned maintenance contracts
More about Hangar and large-span doors · industrial doors in Folkestone. Last updated 19 October 2026.