Hangar and large-span doors in Kenilworth

In short

Large openings at sites in Kenilworth (CV8) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.

Town: Kenilworth
Postcode district: CV8
Area: Warwickshire
Survey: Free for new installations

Options for hangar and large-span doors in Kenilworth

Safety systems. Edge protection, photocells, warning lights, sounders and interlocks.
Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.
Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.

What this work can involve

Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.

Safety law for industrial doors in England

Industrial doors in Kenilworth are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Kenilworth vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for hangar and large-span doors in Kenilworth

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Hangar and large-span doors in Kenilworth: your questions

Can you refurbish our existing hangar doors in Kenilworth?

Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.

Do you work on hangar door projects with our engineer in Kenilworth?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

How much does a hangar door cost in Kenilworth?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Kenilworth, we confirm a fixed price in writing.

Hangar and large-span doors near Kenilworth

Besides Kenilworth, we can survey and quote for sites in Warwick, Coventry, Leamington Spa and the rest of Warwickshire.

Other services in Kenilworth

More about Hangar and large-span doors · industrial doors in Kenilworth. Last updated 19 October 2026.