The short version
Planning a new hangar or large shed near Bedworth? We work with your structural engineer and contractor on multi-leaf sliding, vertical-lift fabric or large sectional doors designed around the building.
- Town
- Bedworth
- Postcode district
- CV12
- Area
- Warwickshire
- Survey
- Free for new installations
What to specify
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
Examples of work we can quote for
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
Who is responsible for door safety at a site in Bedworth?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about hangar and large-span doors
Do you service large doors across Warwickshire?
Yes. We service and repair hangar and large-span doors across Warwickshire, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Which hangar door type would suit our building in Bedworth?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
Do you work on hangar door projects with our engineer in Bedworth?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
Hangar and large-span doors near Bedworth
Working in Bedworth? We also take on jobs in Nuneaton, Coventry, Hinckley and across Warwickshire.
- Hangar and large-span doors in Nuneaton
- Hangar and large-span doors in Coventry
- Hangar and large-span doors in Hinckley
- Hangar and large-span doors in Kenilworth
- Hangar and large-span doors in Rugby
- Hangar and large-span doors in Leamington Spa
Other services in Bedworth
- Industrial door repairs
- Impact traffic doors
- Industrial door installation
- Bollards and door protection
- Door safety upgrades
- Sliding and folding industrial doors
- Industrial door replacement
- High-speed doors
More about Hangar and large-span doors · industrial doors in Bedworth. Last updated 19 October 2026.