Industrial door replacement in Bedworth

In short

Each door replacement in Bedworth starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Survey: Free for new installations

Options that matter on site

Free survey. We inspect the old door and measure the opening at no cost before quoting.
Right door type. Replace with the same type or move to a door that suits your current needs.
Disposal. Old doors taken away for recycling or disposal.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Commissioning. Safety devices tested, forces measured and instructions handed over.

What this work can involve

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.

Powered door rules that apply in Bedworth

Bedworth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Bedworth

Do you replace doors at multiple sites across Warwickshire?

Yes. We replace doors across Warwickshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

How long will our opening in Bedworth be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Should we repair or replace our door in Bedworth?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Industrial door replacement near Bedworth

Bedworth is in the CV12 postcode district in Warwickshire. We also cover Nuneaton, Coventry, Hinckley.

Other services in Bedworth

More about Industrial door replacement · industrial doors in Bedworth. Last updated 19 October 2026.