Bollards and door protection in Bedworth

In short

Bollards and door protection for warehouses, yards and loading bays in Bedworth. We look at where your doors are being hit, then fit bollards, guards, buffers and bumpers to stop it happening again.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Survey: Free for new installations

What we fit in Bedworth

Dock bumpers. Fresh bumpers keep trailers off the wall, the leveller and the shelter.
Steel bollards. Galvanised, painted steel bollards, concrete-filled where needed.
Guide-rail guards. Guards over the base of door guides and tracks, where most hits land.
Suitable fixings. Base-plated or set in foundations, chosen for your slab.
Polymer bollards. Bollards that flex on impact, sparing the floor, the vehicle and themselves.

What this work can involve

Fitting rubber corner buffers to a door frame where pallet trucks clip the wall on a tight turn.
Placing bollards beside a fire shutter so stored goods and trucks cannot obstruct its closing line.
Replacing worn-through dock bumpers so reversing trailers stop short of the wall and the leveller lip.

Loading bay safety in England

Dock levellers, shelters and restraints are work equipment, so in Bedworth the business running the site must keep them in efficient working order under PUWER 1998, and keep traffic routes safe under the Workplace Regulations 1992. Dock levellers are built to BS EN 1398; powered loading bay doors are covered by the Supply of Machinery (Safety) Regulations 2008 and BS EN 12453.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for bollards and door protection in Bedworth

Bollards and door protection guide prices
Item	Guide price (ex VAT)
Bollard, installed	£125 – £445 each
Door protection (guide-rail guards, buffers)	£345 – £1,495 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you protect our existing doors in Bedworth?

Yes. Guards, buffers and bollards are fitted around existing doors and frames. If a guide or frame is already bent, we recommend repairing it first so the door runs properly behind its new protection.

Do you replace dock bumpers across Warwickshire?

Yes. We replace worn dock bumpers and fit wheel guides and corner bollards at loading bays across Warwickshire, often during a leveller service or bay refurbishment to save a separate visit.

Will fitting bollards damage the floor at our Bedworth site?

We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.

Bollards and door protection near Bedworth

Bedworth is in the CV12 postcode district in Warwickshire. We also cover Nuneaton, Coventry, Hinckley.

Other services in Bedworth

More about Bollards and door protection · industrial doors in Bedworth. Last updated 19 October 2026.