Quick answer
Sliding and folding industrial doors for farms, workshops, vehicle sheds and wide-span buildings in Bedworth. We survey the opening and the structure, then recommend a top-hung or bottom-rolling layout that suits it.
- Town
- Bedworth
- Postcode district
- CV12
- Area
- Warwickshire
- Survey
- Free for new installations
Options that matter on site
- Insulated options. Insulated panel infill and edge seals for heated buildings.
- Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
- No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
- Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
- Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Typical scopes of work
- Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
- Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
- Automating a pair of heavy bi-parting sliding doors with a drive motor, safety edges and photocells.
Powered door rules that apply in Bedworth
Bedworth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for sliding and folding industrial doors in Bedworth
| Item | Guide price (ex VAT) |
|---|---|
| Sliding / folding industrial doors | £5,995 – £24,995 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How long does it take to fit sliding doors in Bedworth?
A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.
Which is better for our Bedworth site, top-hung or bottom-rolling?
Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.
Do you repair sliding and folding doors in Bedworth?
Yes. We replace trolleys, wheels, tracks, guides and damaged cladding on most makes of sliding and folding door. Repair visits are chargeable, and we quote before carrying out larger repairs or recommending replacement.
Sliding and folding industrial doors near Bedworth
Our teams cover Bedworth (CV12) and nearby Nuneaton, Coventry, Hinckley, along with the rest of Warwickshire.
- Sliding and folding industrial doors in Nuneaton
- Sliding and folding industrial doors in Coventry
- Sliding and folding industrial doors in Hinckley
- Sliding and folding industrial doors in Kenilworth
- Sliding and folding industrial doors in Rugby
- Sliding and folding industrial doors in Leamington Spa
Other services in Bedworth
- Bollards and door protection
- Industrial door motor replacement
- Industrial roller shutters
- Industrial door replacement
- Industrial door installation
- Industrial door repairs
- Dock levellers
- Fire shutters
More about Sliding and folding industrial doors · industrial doors in Bedworth. Last updated 19 October 2026.