Sliding and folding industrial doors in the West Midlands

At a glance

Not enough headroom for a shutter at your the West Midlands building? Sliding and folding doors open sideways instead of upwards, leaving the roof space clear for cranes, lighting, sprinklers and other services.

Area: West Midlands
Nation: England
Main town: Birmingham
Survey: Free for new installations

Options that matter on site

Top-hung or bottom-rolling. Weight carried overhead or on a floor rail, chosen to suit the structure.
Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.

What this work can involve

Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Automating a pair of heavy bi-parting sliding doors with a drive motor, safety edges and photocells.

Who is responsible for door safety at a site in the West Midlands?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Sites in and around the West Midlands vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for sliding and folding industrial doors in the West Midlands

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How long does it take to fit sliding doors in the West Midlands?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Which is better for our the West Midlands site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Can our existing sliding doors in the West Midlands be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Towns in the West Midlands we cover

We cover 18 towns in the West Midlands for sliding and folding industrial doors, including Birmingham, Coventry, Wolverhampton, Dudley.

Other services in the West Midlands

More about Sliding and folding industrial doors. Last updated 19 October 2026.