Industrial door motor replacement in Bedworth

In short

Door stalling, grinding or creeping down at your Bedworth site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Guide price: £845 – £2,395

How we look after doors in Bedworth

Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Written records. A record of the work and tests for your maintenance file.

What this work can involve

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Powered door rules that apply in Bedworth

Bedworth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Budgeting for industrial door motor replacement in Bedworth

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Bedworth

Is the motor really the problem with our door in Bedworth?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Bedworth?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Will our door in Bedworth be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Bedworth

Besides Bedworth, we can survey and quote for sites in Nuneaton, Coventry, Hinckley and the rest of Warwickshire.

Other services in Bedworth

More about Industrial door motor replacement · industrial doors in Bedworth. Last updated 19 October 2026.