Industrial door motor replacement in Nuneaton

At a glance

Door stalling, grinding or creeping down at your Nuneaton site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Nuneaton
Postcode district: CV11
Area: Warwickshire
Guide price: £845 – £2,395

How we look after doors in Nuneaton

Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.

Typical scopes of work

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Safety law for industrial doors in England

Industrial doors in Nuneaton are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Service and repair visits in Nuneaton are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Prices for industrial door motor replacement in Nuneaton

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Nuneaton

How soon can a door motor in Nuneaton be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Do you replace motors on any make of door across Warwickshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Warwickshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

How much does an industrial door motor replacement cost in Nuneaton?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Nuneaton costs £145 to £195 ex VAT.

Industrial door motor replacement near Nuneaton

Besides Nuneaton, we can survey and quote for sites in Bedworth, Hinckley, Coventry and the rest of Warwickshire.

Other services in Nuneaton

More about Industrial door motor replacement · industrial doors in Nuneaton. Last updated 19 October 2026.