Industrial roller shutters in Bedworth

Quick answer

Industrial roller shutters for warehouses, yards, workshops and stores in Bedworth. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Survey: Free for new installations

What we fit in Bedworth

Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Manual override. If the power fails, the shutter can still be wound open by hand.

What this work can involve

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Who is responsible for door safety at a site in Bedworth?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for industrial roller shutters in Bedworth

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Bedworth

Can you convert our manual shutter in Bedworth to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you remove old shutters at sites in Bedworth?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Does an electric roller shutter at our Bedworth site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Bedworth

Our teams cover Bedworth (CV12) and nearby Nuneaton, Coventry, Hinckley, along with the rest of Warwickshire.

Other services in Bedworth

More about Industrial roller shutters · industrial doors in Bedworth. Last updated 19 October 2026.