Steel personnel and fire exit doors in Bedworth

Quick answer

Replacing a worn timber or tired steel door at a site in Bedworth (CV12)? Our galvanised steel doorsets resist knocks, weather and forced entry, and are finished in a powder-coated colour of your choice.

Town: Bedworth
Postcode district: CV12
Area: Warwickshire
Survey: Free for new installations

What to specify

Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.

Typical scopes of work

Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.

Door rules for workplaces in England

Doors in Bedworth workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for steel personnel and fire exit doors in Bedworth

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which fire exit hardware do we need at our Bedworth site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

How much is a steel personnel door in Bedworth?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Bedworth premises in writing after a free survey.

Can a steel door at our Bedworth unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

Steel personnel and fire exit doors near Bedworth

Working in Bedworth? We also take on jobs in Nuneaton, Coventry, Hinckley and across Warwickshire.

Other services in Bedworth

More about Steel personnel and fire exit doors · industrial doors in Bedworth. Last updated 19 October 2026.